Our Products

Deckrete Industrial System

Industrial Floor Epoxy Coating

Topkrete Sealcoat

Deckrete Car Park Deck System

Polyurethane

Car Park Polyurethane Color Coating

Deckrete ES Epoxy Screeding System

Deckrete ES Epoxy Screeding System Specification

Product Type
Epoxy Screeding System

Solid Content
100% solid

Color
Grey

Hard dry time
24-48 hours

State
Self-leveling screed

Application
Industrial flooring, Warehouse floors, Factory floors, Heavy-duty areas

Application Method
Trowel application

Properties
High chemical resistance, Abrasion resistance, Seamless finish, Heavy load resistance

Total dry time
24 hours at 30C

Resistant Feature
Chemical, impact and abrasion resistant

Color Retention
Excellent

Compressive Strength
> 60 N/mm

Service Period
10-15 years

Thickness
3 mm to 10 mm

Raw Material
Epoxy Resin, Hardener, Inert Fillers

Touch Dry
4-6 hours at 30C

Pot Life
30-40 minutes at 30°C

Curing Time
7 days for full cure

Maintenance
Low, easy to clean

Substrate Suitability
Concrete, Metal (primed), Old screeds

Shelf Life
12 months (unopened) at 25°C

Water Absorption
< 0.1%

Bond Strength
> 2 MPa

VOC Content
Nil

Finish
Smooth, seamless, non-porous

Mixing Ratio
As per technical data sheet

Deckrete ES Epoxy Screeding System Trade Information

Main Export Market(s)
Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

About Deckrete ES Epoxy Screeding System

Uses :

Heavy Duty Industrial Floors
Workshop
Production Areas
Warehouses
Storage Areas

Advantages

Solvent free
Seamless
Hard wearing
Non-dusting
Easy to clean
Impermeable
High impact resistant
Moisture barrier (6mm)
Chemical resistant
Fast track installation

Seamless Durability for Industrial Flooring Needs

Deckrete ES Epoxy Screeding System delivers robust protection for floors subjected to tough industrial conditions. Its solid content formulation ensures high compressive strength and superior resistance to chemicals and abrasion. The smooth, seamless finish not only enhances appearance but also simplifies maintenance for easier cleaning and reduced downtime.

Easy Application and Long Service Life

The system is conveniently applied via troweling onto concrete, metal (primed), or old screeds, with thickness ranging from 3 mm to 10 mm. Its state as a self-leveling screed provides a uniform surface. With proper installation and care, users can expect 10-15 years of dependable performance, making it a wise investment for high-traffic areas.

FAQ's of Deckrete ES Epoxy Screeding System:

Q: How should Deckrete ES Epoxy Screeding System be applied?

A: The product is typically applied using a trowel onto suitable substrates such as concrete, primed metal, or existing screeds. Always refer to the technical data sheet for precise mixing ratios and application instructions to ensure optimal results.

Q: What benefits does Deckrete ES Epoxy Screeding System offer for industrial flooring?

A: Deckrete ES provides a smooth, seamless, and non-porous finish that resists chemicals, impact, and abrasion. Its exceptional bond strength and compressive strength make it ideal for areas exposed to heavy loads and frequent traffic. Maintenance is low due to its easy-to-clean surface.

Q: When can the newly installed Deckrete ES surface be used after application?

A: The surface is touch dry within 4-6 hours at 30C and can be walked on after 24-48 hours. However, full curing is achieved in 7 days, after which the floor can withstand heavy-duty use.

Q: Where is Deckrete ES Epoxy Screeding System most suitable for installation?

A: This screeding system is designed for use in industrial settings such as warehouses, factory floors, and other heavy-duty environments that demand high durability and resistance against chemicals and mechanical stress.

Q: What is the recommended shelf life and storage condition for Deckrete ES Epoxy Screeding System?

A: Deckrete ES should be stored unopened for up to 12 months at 25C. Proper storage ensures the quality and performance of both the resin and hardener components.

Q: Does Deckrete ES contain any harmful VOCs?

A: No, Deckrete ES is formulated with zero VOC (Volatile Organic Compound) content, making it an environmentally friendly choice for industrial and commercial spaces.